Find a Service Center
Alternate Products
- 01 Series Pillow Block
- 1 7/16" Shaft
- 2 3/8" Centerline to Base
- 9" Base Length
- 7 1/8" Bolt Centers
description
- All grooved outer races must be clamped axially
applications
- Conveyors
- Mechanical handling
- Electrical machinery
- Fans
- Haulage
- Winders
- Headgear
- Marine
- Paper manufacturing
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Lubrication | Relubricatable |
| Housing Material | Cast Iron |
| Bolt Size | 1/2 in |
| Base Length | 9 in |
| Inch/Metric | Inch |
| Shaft Dia. | 1.4375 in |
| Housing Height | 5 1/2 in |
| Bolt Hole Spacing | 7 1/8 in |
| Seal Type | Triple Labyrinth Seals |
| Bearing Type | Split Cylindrical |
| Pillow Block Type | Thru-Bolt |
| Pedestal | P 01 |
| RPM [Max] | 5400 rpm |
| Temperature Range [Min] | 32 °F |
| Axial Load | 720 lbf |
| Base Width | 2 3/8 in |
| Dynamic Load Rating | 14600 lbf |
| Housing Construction | 2 Piece |
| Bearing Design | Non-Expansion |
| Static Load Rating [Max] | 15100 lbf |
| End Type | Open End |
| Bolt Hole Spacing Range [Min] | 6 3/4 in |
| Series | 01 Series |
| Base Height | 7/8 in |
| Mounted Unit Duty | Heavy-Duty |
| Temperature Range [Max] | 212 °F |
| Insert Type | Split Steel Insert |
| Bolt Hole Spacing Range [Max] | 7 1/2 in |
| Locking Device | Clamping Ring Collar |
| Bolt Holes | 2 |
| Weight | 11.726 LB |
| EAN or UPC | 7316576849510 |
