Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 18.2 Cubic Inch Displacement Per Rev
description
- Geroler motors are similar in design to the geroter motor, but feature better low-speed performance characteristics and higher overall efficiency.They can generate up to 15 hp.Motors with the Geroler element provide high starting and running torque as well.By minimizing friction, the Geroler element helps to increase efficiency while providing smooth output shaft rotation even at very low speeds.
applications
- Agricultural augers, Harvesters, Seeders, Railroad maintenance equipment
features
- Speed up to 1,150 rpm
- Compact size
- Provides high efficiency, even at start-up and low speeds
- Motor shaft rotation can instantly be reversed by changing direction of input/output flow while generating equal torque in either direction
options
- SAE ports
- Splined and tapered shafts
| Port Code | A |
| Pressure [Max] | 1500 psi |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Port Size & Location | SAE-10 Side |
| Special Features | None |
| Special Features Assembly Code | 0 |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Pilot Diameter | 3.25 in |
| Special Features Hardware Code | 00 |
| Inlet Pressure [Max] | 2500 psi |
| Port Location | Side Port |
| Mount Type | 2 Bolt |
| Displacement (in³/rev) | 18.2 |
| Port Type | SAE O-Ring |
| Mounting Hole Size | 0.535 in |
| Output Torque at Rated PSI (inch/pounds) | 4345 in lb |
| Seal Material | Buna-N |
| Mounting Type Code | REF! |
| Corrosion Resistant | No |
| Series | S Series |
| Case Drain Code | 1 |
| Output Shaft Code | 01 |
| Splines | 0 |
| Paint Code | A |
| RPM [Max] | 190 rpm |
| Port Size | SAE-10, 7/8-14 UNF |
| Motor Element | Gerotor |
| Rotation | Standard Rotation |
| RPM [Min] | 190 rpm |
| Case Drain | 0.4375-20 UNF-2B SAE O-Ring Port (End Cap) |
| Motor Type | Spool Valve |
| Flow [Max] | 15 gal/min |
| Material | Cast Iron |
| Bolt Circle Dia. | 4.19 in |
| Maximum Speed @ Continuous Flow | 190 rpm @ 15 gal/min |
| Mounting Holes | 0.535 in |
| Duty | Standard-Duty |
| Flow Rate | 15 gal/min |
| Flange Orientation | Standard |
| Shaft Type | Straight w/ Woodruff Key |
| Weight | 29.0 LB |
