
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 18.2 Cubic Inch Displacement Per Rev
description
- Geroler motors are similar in design to the geroter motor, but feature better low-speed performance characteristics and higher overall efficiency.They can generate up to 15 hp.Motors with the Geroler element provide high starting and running torque as well.By minimizing friction, the Geroler element helps to increase efficiency while providing smooth output shaft rotation even at very low speeds.
applications
- Agricultural augers, Harvesters, Seeders, Railroad maintenance equipment
features
- Speed up to 1,150 rpm
- Compact size
- Provides high efficiency, even at start-up and low speeds
- Motor shaft rotation can instantly be reversed by changing direction of input/output flow while generating equal torque in either direction
options
- SAE ports
- Splined and tapered shafts
Port Type | SAE O-Ring |
Port Size | SAE-10, 7/8-14 UNF |
Motor Element | Gerotor |
Motor Type | Spool Valve |
Flange Orientation | Standard |
Port Size & Location | SAE-10 Side |
RPM [Max] | 190 rpm |
Paint/Packaging | Low Gloss Black, Individual Box |
Port Location | Side Port |
Rotation | Standard Rotation |
Pilot Diameter | 3.25 in |
Inlet Pressure [Max] | 2500 psi |
Shaft Size & Type | 1 in x 1/4 in Straight |
Pressure [Max] | 1500 psi |
Paint Code | A |
Port Code | A |
Special Features Hardware Code | 00 |
Case Drain | 0.4375-20 UNF-2B SAE O-Ring Port (End Cap) |
Output Torque at Rated PSI (inch/pounds) | 4345 in lb |
Seal Material | Buna-N |
Flow Rate | 15 gal/min |
Splines | 0 |
Mount Type | 2 Bolt |
Maximum Speed @ Continuous Flow | 190 rpm @ 15 gal/min |
Output Shaft Code | 01 |
Special Features Assembly Code | 0 |
Duty | Standard-Duty |
Displacement (in³/rev) | 18.2 |
Shaft Type | Straight w/ Woodruff Key |
Mounting Hole Size | 0.535 in |
Flow [Max] | 15 gal/min |
Case Drain Code | 1 |
Corrosion Resistant | No |
Special Features | None |
Mounting Holes | 0.535 in |
Material | Cast Iron |
Bolt Circle Dia. | 4.19 in |
Series | S Series |
Mounting Type Code | REF! |
RPM [Min] | 190 rpm |
Weight | 29.0 LB |
