Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 10.07 Cubic Inch Displacement Per Rev
description
- Geroler motors are similar in design to the geroter motor, but feature better low-speed performance characteristics and higher overall efficiency.They can generate up to 15 hp.Motors with the Geroler element provide high starting and running torque as well.By minimizing friction, the Geroler element helps to increase efficiency while providing smooth output shaft rotation even at very low speeds.
applications
- Agricultural augers, Harvesters, Seeders, Railroad maintenance equipment
features
- Speed up to 1,150 rpm
- Compact size
- Provides high efficiency, even at start-up and low speeds
- Motor shaft rotation can instantly be reversed by changing direction of input/output flow while generating equal torque in either direction
options
- SAE ports
- Splined and tapered shafts
| Mounting Hole Size | 0.535 in |
| Port Type | SAE O-Ring |
| RPM [Max] | 165 rpm, 343 rpm |
| Bolt Circle Dia. | 4.19 in |
| Series | S Series |
| Displacement (in³/rev) | 10.07 |
| Pilot Diameter | 3.25 in |
| Port Code | A |
| Mounting Type Code | REF! |
| Special Features | None |
| Rotation | Standard Rotation |
| Port Size | SAE-10, 7/8-14 UNF |
| Port Location | Side Port |
| Flow Rate | 15 gal/min |
| Mounting Holes | 0.535 in |
| Case Drain Code | 1 |
| Duty | Standard-Duty |
| Shaft Type | Straight w/ Woodruff Key |
| Pressure [Max] | 1900 psi |
| Output Torque at Rated PSI (inch/pounds) | 2664.07 in lb |
| Inlet Pressure [Max] | 2500 psi |
| Mount Type | 2 Bolt |
| Flange Orientation | Standard |
| Motor Element | Gerotor |
| Motor Type | Spool Valve |
| Flow [Max] | 15 gal/min |
| Splines | 0 |
| Seal Material | Buna-N |
| Special Features Hardware Code | 00 |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Port Size & Location | SAE-10 Side |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Paint Code | A |
| Corrosion Resistant | No |
| Material | Cast Iron |
| Special Features Assembly Code | 0 |
| Output Shaft Code | 01 |
| Case Drain | 0.4375-20 UNF-2B SAE O-Ring Port (End Cap) |
| Maximum Speed @ Continuous Flow | 343 rpm @ 15 gal/min |
| Weight | 29.0 LB |
