Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 10.07 Cubic Inch Displacement Per Rev
description
- Geroler motors are similar in design to the geroter motor, but feature better low-speed performance characteristics and higher overall efficiency.They can generate up to 15 hp.Motors with the Geroler element provide high starting and running torque as well.By minimizing friction, the Geroler element helps to increase efficiency while providing smooth output shaft rotation even at very low speeds.
applications
- Agricultural augers, Harvesters, Seeders, Railroad maintenance equipment
features
- Speed up to 1,150 rpm
- Compact size
- Provides high efficiency, even at start-up and low speeds
- Motor shaft rotation can instantly be reversed by changing direction of input/output flow while generating equal torque in either direction
options
- SAE ports
- Splined and tapered shafts
| Motor Element | Gerotor |
| Rotation | Standard Rotation |
| Inlet Pressure [Max] | 2500 psi |
| Mounting Hole Size | 0.535 in |
| Flange Orientation | Standard |
| Displacement (in³/rev) | 10.07 |
| Mounting Type Code | REF! |
| Material | Cast Iron |
| Shaft Type | Straight w/ Woodruff Key |
| Port Location | Side Port |
| Pilot Diameter | 3.25 in |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Pressure [Max] | 1900 psi |
| Port Size & Location | SAE-10 Side |
| Splines | 0 |
| Case Drain | 0.4375-20 UNF-2B SAE O-Ring Port (End Cap) |
| Flow [Max] | 15 gal/min |
| Special Features Assembly Code | 0 |
| Maximum Speed @ Continuous Flow | 343 rpm @ 15 gal/min |
| Output Torque at Rated PSI (inch/pounds) | 2664.07 in lb |
| Port Size | SAE-10, 7/8-14 UNF |
| Special Features Hardware Code | 00 |
| RPM [Max] | 165 rpm, 343 rpm |
| Flow Rate | 15 gal/min |
| Corrosion Resistant | No |
| Port Code | A |
| Series | S Series |
| Seal Material | Buna-N |
| Special Features | None |
| Mounting Holes | 0.535 in |
| Port Type | SAE O-Ring |
| Mount Type | 2 Bolt |
| Bolt Circle Dia. | 4.19 in |
| Duty | Standard-Duty |
| Output Shaft Code | 01 |
| Motor Type | Spool Valve |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Case Drain Code | 1 |
| Paint Code | A |
| Weight | 29.0 LB |
