Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 4.6 Cubic Inch Displacement Per Rev
description
- Geroler motors are similar in design to the geroter motor, but feature better low-speed performance characteristics and higher overall efficiency.They can generate up to 15 hp.Motors with the Geroler element provide high starting and running torque as well.By minimizing friction, the Geroler element helps to increase efficiency while providing smooth output shaft rotation even at very low speeds.
applications
- Agricultural augers, Harvesters, Seeders, Railroad maintenance equipment
features
- Speed up to 1,150 rpm
- Compact size
- Provides high efficiency, even at start-up and low speeds
- Motor shaft rotation can instantly be reversed by changing direction of input/output flow while generating equal torque in either direction
options
- SAE ports
- Splined and tapered shafts
| Port Location | Side Port |
| RPM [Max] | 792 rpm |
| Output Torque at Rated PSI (inch/pounds) | 1325 in lb |
| Case Drain Code | 1 |
| Rotation | Standard Rotation |
| Mounting Holes | 0.535 in |
| Maximum Speed @ Continuous Flow | 792 rpm @ 15 gal/min |
| Mounting Type Code | REF! |
| Case Drain | 0.4375-20 UNF-2B SAE O-Ring Port (End Cap) |
| Paint Code | A |
| Series | S Series |
| Port Size & Location | SAE-10 Side |
| Displacement (in³/rev) | 4.6 |
| Pressure [Max] | 2000 psi |
| Port Type | SAE O-Ring |
| Pilot Diameter | 3.25 in |
| Splines | 0 |
| Material | Cast Iron |
| Special Features | None |
| Shaft Type | Straight w/ Woodruff Key |
| Motor Type | Spool Valve |
| Mount Type | 2 Bolt |
| Flow Rate | 15 gal/min |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Inlet Pressure [Max] | 2500 psi |
| Port Code | A |
| Duty | Standard-Duty |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Special Features Assembly Code | 0 |
| Seal Material | Buna-N |
| Bolt Circle Dia. | 4.19 in |
| Motor Element | Gerotor |
| Flow [Max] | 15 gal/min |
| Corrosion Resistant | No |
| Flange Orientation | Standard |
| Port Size | SAE-10, 7/8-14 UNF |
| Mounting Hole Size | 0.535 in |
| Special Features Hardware Code | 00 |
| RPM [Min] | 792 rpm |
| Output Shaft Code | 01 |
| Weight | 29.0 LB |
