Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 4.6 Cubic Inch Displacement Per Rev
description
- Geroler motors are similar in design to the geroter motor, but feature better low-speed performance characteristics and higher overall efficiency.They can generate up to 15 hp.Motors with the Geroler element provide high starting and running torque as well.By minimizing friction, the Geroler element helps to increase efficiency while providing smooth output shaft rotation even at very low speeds.
applications
- Agricultural augers, Harvesters, Seeders, Railroad maintenance equipment
features
- Speed up to 1,150 rpm
- Compact size
- Provides high efficiency, even at start-up and low speeds
- Motor shaft rotation can instantly be reversed by changing direction of input/output flow while generating equal torque in either direction
options
- SAE ports
- Splined and tapered shafts
| Maximum Speed @ Continuous Flow | 792 rpm @ 15 gal/min |
| Mounting Holes | 0.535 in |
| Port Size & Location | SAE-10 Side |
| Mounting Type Code | REF! |
| Port Code | A |
| Splines | 0 |
| Bolt Circle Dia. | 4.19 in |
| Motor Type | Spool Valve |
| Rotation | Standard Rotation |
| Material | Cast Iron |
| Special Features | None |
| Output Shaft Code | 01 |
| Special Features Assembly Code | 0 |
| Duty | Standard-Duty |
| RPM [Max] | 792 rpm |
| Port Size | SAE-10, 7/8-14 UNF |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Pilot Diameter | 3.25 in |
| Inlet Pressure [Max] | 2500 psi |
| Flow [Max] | 15 gal/min |
| Special Features Hardware Code | 00 |
| Series | S Series |
| Port Location | Side Port |
| RPM [Min] | 792 rpm |
| Case Drain Code | 1 |
| Displacement (in³/rev) | 4.6 |
| Pressure [Max] | 2000 psi |
| Output Torque at Rated PSI (inch/pounds) | 1325 in lb |
| Port Type | SAE O-Ring |
| Shaft Type | Straight w/ Woodruff Key |
| Mount Type | 2 Bolt |
| Case Drain | 0.4375-20 UNF-2B SAE O-Ring Port (End Cap) |
| Flow Rate | 15 gal/min |
| Flange Orientation | Standard |
| Motor Element | Gerotor |
| Seal Material | Buna-N |
| Corrosion Resistant | No |
| Paint Code | A |
| Mounting Hole Size | 0.535 in |
| Weight | 29.0 LB |
