Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 3.5 Cubic Inch Displacement Per Rev
description
- Geroler motors are similar in design to the geroter motor, but feature better low-speed performance characteristics and higher overall efficiency.They can generate up to 15 hp.Motors with the Geroler element provide high starting and running torque as well.By minimizing friction, the Geroler element helps to increase efficiency while providing smooth output shaft rotation even at very low speeds.
applications
- Agricultural augers, Harvesters, Seeders, Railroad maintenance equipment
features
- Speed up to 1,150 rpm
- Compact size
- Provides high efficiency, even at start-up and low speeds
- Motor shaft rotation can instantly be reversed by changing direction of input/output flow while generating equal torque in either direction
options
- SAE ports
- Splined and tapered shafts
| Paint Code | A |
| Flow [Max] | 15 gal/min |
| RPM [Min] | 963 rpm |
| Motor Element | Gerotor |
| Splines | 0 |
| Inlet Pressure [Max] | 2500 psi |
| Port Location | Side Port |
| Output Shaft Code | 01 |
| Flange Orientation | Standard |
| Port Code | A |
| Motor Type | Spool Valve |
| RPM [Max] | 963 rpm |
| Pilot Diameter | 3.25 in |
| Special Features Hardware Code | 00 |
| Rotation | Standard Rotation |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Special Features Assembly Code | 0 |
| Mounting Type Code | REF! |
| Port Size | SAE-10, 7/8-14 UNF |
| Output Torque at Rated PSI (inch/pounds) | 1021 in lb |
| Case Drain Code | 1 |
| Flow Rate | 15 gal/min |
| Corrosion Resistant | No |
| Special Features | None |
| Bolt Circle Dia. | 4.19 in |
| Shaft Type | Straight w/ Woodruff Key |
| Port Type | SAE O-Ring |
| Displacement (in³/rev) | 3.5 |
| Maximum Speed @ Continuous Flow | 963 rpm @ 15 gal/min |
| Mounting Holes | 0.535 in |
| Material | Cast Iron |
| Series | S Series |
| Seal Material | Buna-N |
| Case Drain | 0.4375-20 UNF-2B SAE O-Ring Port (End Cap) |
| Mounting Hole Size | 0.535 in |
| Mount Type | 2 Bolt |
| Pressure [Max] | 2000 psi |
| Port Size & Location | SAE-10 Side |
| Duty | Standard-Duty |
| Weight | 29.0 LB |
