Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 3.5 Cubic Inch Displacement Per Rev
description
- Geroler motors are similar in design to the geroter motor, but feature better low-speed performance characteristics and higher overall efficiency.They can generate up to 15 hp.Motors with the Geroler element provide high starting and running torque as well.By minimizing friction, the Geroler element helps to increase efficiency while providing smooth output shaft rotation even at very low speeds.
applications
- Agricultural augers, Harvesters, Seeders, Railroad maintenance equipment
features
- Speed up to 1,150 rpm
- Compact size
- Provides high efficiency, even at start-up and low speeds
- Motor shaft rotation can instantly be reversed by changing direction of input/output flow while generating equal torque in either direction
options
- SAE ports
- Splined and tapered shafts
| Maximum Speed @ Continuous Flow | 963 rpm @ 15 gal/min |
| Port Size & Location | SAE-10 Side |
| Flow Rate | 15 gal/min |
| Displacement (in³/rev) | 3.5 |
| Paint Code | A |
| Mount Type | 2 Bolt |
| Special Features Assembly Code | 0 |
| Flow [Max] | 15 gal/min |
| Material | Cast Iron |
| Special Features | None |
| Inlet Pressure [Max] | 2500 psi |
| Port Type | SAE O-Ring |
| Seal Material | Buna-N |
| Motor Element | Gerotor |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Special Features Hardware Code | 00 |
| Corrosion Resistant | No |
| Case Drain | 0.4375-20 UNF-2B SAE O-Ring Port (End Cap) |
| Output Torque at Rated PSI (inch/pounds) | 1021 in lb |
| Case Drain Code | 1 |
| Series | S Series |
| RPM [Max] | 963 rpm |
| Mounting Type Code | REF! |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Port Size | SAE-10, 7/8-14 UNF |
| Mounting Holes | 0.535 in |
| RPM [Min] | 963 rpm |
| Output Shaft Code | 01 |
| Shaft Type | Straight w/ Woodruff Key |
| Flange Orientation | Standard |
| Motor Type | Spool Valve |
| Pressure [Max] | 2000 psi |
| Pilot Diameter | 3.25 in |
| Port Code | A |
| Bolt Circle Dia. | 4.19 in |
| Port Location | Side Port |
| Splines | 0 |
| Duty | Standard-Duty |
| Rotation | Standard Rotation |
| Mounting Hole Size | 0.535 in |
| Weight | 29.0 LB |
