Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- Port
- 45.09 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Port Type | NPTF |
| RPM [Max] | 74 rpm |
| Paint Code | A |
| Special Features | Free Running Gerotor |
| Pilot Diameter | 3.25 in |
| Mounting Hole Size | 0.565 in |
| Special Features Hardware Code | AA |
| Flow [Max] | 15 gal/min |
| Displacement (in³/rev) | 45.09 |
| Motor Element | Gerotor |
| Case Drain Code | 0 |
| Corrosion Resistant | No |
| Seal Material | Buna-N |
| Pressure [Max] | 600 psi |
| Flange Orientation | Standard |
| Duty | Standard-Duty |
| Output Torque at Rated PSI (inch/pounds) | 3440 in lb |
| Port Size | 1/2 |
| Port Size & Location | 1/2 in NPTF Side |
| Mount Type | 2 Bolt |
| Special Features Assembly Code | 0 |
| Motor Type | Spool Valve |
| Maximum Speed @ Continuous Flow | 74 rpm @ 15 gal/min |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Shaft Type | Straight w/ Woodruff Key |
| Output Shaft Code | 01 |
| Mounting Holes | 0.535 in |
| Port Code | B |
| Inlet Pressure [Max] | 2500 psi |
| Bolt Circle Dia. | 4.187 in |
| Splines | 0 |
| Case Drain | None |
| Mounting Type Code | A |
| Material | Cast Iron |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Flow Rate | 57 lpm |
| Series | H Series |
| Port Location | Side Port |
| RPM [Min] | 74 rpm |
| Rotation | Standard Rotation |
| Weight | 13.0 LB |
