Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- Port
- 45.09 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Mounting Type Code | A |
| Bolt Circle Dia. | 4.187 in |
| Inlet Pressure [Max] | 2500 psi |
| Flange Orientation | Standard |
| Duty | Standard-Duty |
| Motor Type | Spool Valve |
| Rotation | Standard Rotation |
| Series | H Series |
| Flow [Max] | 15 gal/min |
| Maximum Speed @ Continuous Flow | 74 rpm @ 15 gal/min |
| RPM [Max] | 74 rpm |
| Case Drain Code | 0 |
| Special Features Hardware Code | AA |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Pressure [Max] | 600 psi |
| Mounting Holes | 0.535 in |
| Flow Rate | 57 lpm |
| Splines | 0 |
| Mounting Hole Size | 0.565 in |
| Special Features | Free Running Gerotor |
| Port Location | Side Port |
| Output Shaft Code | 01 |
| Output Torque at Rated PSI (inch/pounds) | 3440 in lb |
| Port Type | NPTF |
| Mount Type | 2 Bolt |
| RPM [Min] | 74 rpm |
| Corrosion Resistant | No |
| Case Drain | None |
| Displacement (in³/rev) | 45.09 |
| Pilot Diameter | 3.25 in |
| Port Size | 1/2 |
| Motor Element | Gerotor |
| Shaft Type | Straight w/ Woodruff Key |
| Paint Code | A |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Material | Cast Iron |
| Seal Material | Buna-N |
| Special Features Assembly Code | 0 |
| Port Size & Location | 1/2 in NPTF Side |
| Port Code | B |
| Weight | 13.0 LB |
