Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 3/4-16 UNF-2B SAE O-Ring Port
- 17.94 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Output Shaft Code | 01 |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Inlet Pressure [Max] | 2500 psi |
| Material | Cast Iron |
| Shaft Type | Straight w/ Woodruff Key |
| Special Features Hardware Code | 00 |
| Pilot Diameter | 3.25 in |
| Port Code | G |
| Port Type | SAE O-Ring |
| Series | H Series |
| Mounting Hole Size | 0.565 in |
| Output Torque at Rated PSI (inch/pounds) | 3107 in lb |
| Maximum Speed @ Continuous Flow | 192 rpm @ 15 gal/min |
| Paint Code | A |
| Seal Material | Buna-N |
| Flow [Max] | 15 gal/min |
| Pressure [Max] | 1350 psi |
| Splines | 0 |
| Case Drain Code | 0 |
| RPM [Min] | 192 rpm |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| RPM [Max] | 192 rpm |
| Corrosion Resistant | No |
| Mount Type | 2 Bolt |
| Bolt Circle Dia. | 4.187 in |
| Motor Type | Spool Valve |
| Port Size | SAE-8, 3/4-16 UNF-2B |
| Mounting Type Code | A |
| Special Features Assembly Code | 0 |
| Rotation | Standard Rotation |
| Case Drain | None |
| Flange Orientation | Standard |
| Special Features | None |
| Displacement (in³/rev) | 17.94 |
| Flow Rate | 14 gal/min |
| Motor Element | Gerotor |
| Port Location | End Port |
| Mounting Holes | 0.535 in |
| Duty | Standard-Duty |
| Weight | 13.0 LB |
