Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 3/4-16 UNF-2B SAE O-Ring Port
- 17.94 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Motor Type | Spool Valve |
| Case Drain | None |
| Displacement (in³/rev) | 17.94 |
| Bolt Circle Dia. | 4.187 in |
| Flow Rate | 14 gal/min |
| Maximum Speed @ Continuous Flow | 192 rpm @ 15 gal/min |
| Pilot Diameter | 3.25 in |
| Mounting Hole Size | 0.565 in |
| Mounting Holes | 0.535 in |
| Shaft Type | Straight w/ Woodruff Key |
| Output Torque at Rated PSI (inch/pounds) | 3107 in lb |
| Pressure [Max] | 1350 psi |
| Port Location | End Port |
| Case Drain Code | 0 |
| Corrosion Resistant | No |
| Series | H Series |
| Port Code | G |
| Duty | Standard-Duty |
| Paint Code | A |
| Mount Type | 2 Bolt |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Material | Cast Iron |
| Rotation | Standard Rotation |
| Inlet Pressure [Max] | 2500 psi |
| Special Features Hardware Code | 00 |
| Output Shaft Code | 01 |
| Special Features | None |
| Special Features Assembly Code | 0 |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Flange Orientation | Standard |
| Splines | 0 |
| Port Size | SAE-8, 3/4-16 UNF-2B |
| RPM [Max] | 192 rpm |
| Mounting Type Code | A |
| RPM [Min] | 192 rpm |
| Port Type | SAE O-Ring |
| Flow [Max] | 15 gal/min |
| Seal Material | Buna-N |
| Motor Element | Gerotor |
| Weight | 13.0 LB |
