Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 22.58 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Duty | Standard-Duty |
| Case Drain | None |
| Pressure [Max] | 1250 psi |
| Port Code | B |
| Maximum Speed @ Continuous Flow | 152 rpm @ 15 gal/min |
| Shaft Type | Straight w/ Woodruff Key |
| RPM [Max] | 152 rpm |
| Flow [Max] | 15 gal/min |
| Special Features | Speed Sensor |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Motor Element | Gerotor |
| Material | Cast Iron |
| Case Drain Code | 0 |
| Mounting Hole Size | 0.565 in |
| Speed Sensor Options | Digital Speed Pickup (15 Pulse), 127 [5.0] Lead Wire With Packard Weather Pac Shroud Connector (A=Power, B=Signal, C=Common) |
| Port Size | 1/2, 1/2-14 |
| Output Shaft Code | 01 |
| Flow Rate | 14 gal/min |
| Output Torque at Rated PSI (inch/pounds) | 3602 in lb |
| Displacement (in³/rev) | 22.58 |
| Mount Type | 2 Bolt |
| Seal Material | Buna-N |
| Special Features Assembly Code | 0 |
| Motor Type | Spool Valve |
| Splines | 0 |
| Mounting Type Code | A |
| RPM [Min] | 152 rpm |
| Pilot Diameter | 3.25 in |
| Rotation | Standard Rotation |
| Port Size & Location | 1/2 in NPTF Side |
| Mounting Holes | 0.535 in |
| Bolt Circle Dia. | 4.187 in |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Port Type | NPTF |
| Paint Code | A |
| Inlet Pressure [Max] | 2500 psi |
| Corrosion Resistant | No |
| Flange Orientation | Standard |
| Series | H Series |
| Port Location | Side Port |
| Special Features Hardware Code | BZ |
| Weight | 13.0 LB |
