Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 22.58 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| RPM [Min] | 152 rpm |
| Material | Cast Iron |
| Mounting Type Code | A |
| Mount Type | 2 Bolt |
| Rotation | Standard Rotation |
| Flow Rate | 14 gal/min |
| Series | H Series |
| Mounting Hole Size | 0.565 in |
| Flange Orientation | Standard |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Output Torque at Rated PSI (inch/pounds) | 3602 in lb |
| Port Size | 1/2, 1/2-14 |
| Port Location | Side Port |
| Corrosion Resistant | No |
| Shaft Type | Straight w/ Woodruff Key |
| Pilot Diameter | 3.25 in |
| Special Features Assembly Code | 0 |
| Mounting Holes | 0.535 in |
| Motor Type | Spool Valve |
| Special Features Hardware Code | BZ |
| Port Type | NPTF |
| RPM [Max] | 152 rpm |
| Maximum Speed @ Continuous Flow | 152 rpm @ 15 gal/min |
| Duty | Standard-Duty |
| Pressure [Max] | 1250 psi |
| Case Drain | None |
| Bolt Circle Dia. | 4.187 in |
| Port Code | B |
| Displacement (in³/rev) | 22.58 |
| Inlet Pressure [Max] | 2500 psi |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Case Drain Code | 0 |
| Special Features | Speed Sensor |
| Output Shaft Code | 01 |
| Flow [Max] | 15 gal/min |
| Splines | 0 |
| Port Size & Location | 1/2 in NPTF Side |
| Motor Element | Gerotor |
| Speed Sensor Options | Digital Speed Pickup (15 Pulse), 127 [5.0] Lead Wire With Packard Weather Pac Shroud Connector (A=Power, B=Signal, C=Common) |
| Seal Material | Buna-N |
| Paint Code | A |
| Weight | 13.0 LB |
