Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF-2B SAE O-Ring Port
- 2.2 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Port Location | Side Port |
| Flange Orientation | Standard |
| Mounting Hole Size | 0.565 in |
| Series | H Series |
| RPM [Max] | 1021 rpm |
| Special Features Assembly Code | 0 |
| Shaft Type | Straight |
| Mount Type | 2 Bolt |
| Material | Cast Iron |
| Case Drain | None |
| Port Size & Location | SAE-10 Side |
| Duty | Standard-Duty |
| Motor Element | Gerotor |
| Splines | 0 |
| Rotation | Standard Rotation |
| Corrosion Resistant | No |
| Port Type | SAE O-Ring |
| Mounting Type Code | A |
| Mounting Holes | 0.535 in |
| Output Shaft Code | 24 |
| Displacement (in³/rev) | 2.2 |
| Pressure [Max] | 1800 psi |
| Special Features Hardware Code | AA |
| Port Code | A |
| Flow [Max] | 10 gal/min |
| Seal Material | Buna-N |
| Motor Type | Spool Valve |
| Paint Code | A |
| RPM [Min] | 1021 rpm |
| Shaft Size & Type | Straight |
| Flow Rate | 9.5 gal/min |
| Case Drain Code | 0 |
| Port Size | SAE-10, 7/8-14 UNF-2B |
| Output Torque at Rated PSI (inch/pounds) | 496 in lb |
| Maximum Speed @ Continuous Flow | 1021 rpm @ 10 gal/min |
| Pilot Diameter | 3.25 in |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Inlet Pressure [Max] | 2500 psi |
| Geroter/Geroler Options | Free Running |
| Bolt Circle Dia. | 4.187 in |
| Special Features | Free Running Gerotor |
| Weight | 13.0 LB |
