Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF-2B SAE O-Ring Port
- 2.2 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Output Torque at Rated PSI (inch/pounds) | 496 in lb |
| Motor Element | Gerotor |
| Paint Code | A |
| Maximum Speed @ Continuous Flow | 1021 rpm @ 10 gal/min |
| Port Size & Location | SAE-10 Side |
| Mounting Holes | 0.535 in |
| Mounting Type Code | A |
| Motor Type | Spool Valve |
| Flow [Max] | 10 gal/min |
| Special Features Hardware Code | AA |
| Port Size | SAE-10, 7/8-14 UNF-2B |
| Rotation | Standard Rotation |
| Shaft Type | Straight |
| Mounting Hole Size | 0.565 in |
| Pressure [Max] | 1800 psi |
| Bolt Circle Dia. | 4.187 in |
| Port Code | A |
| Flow Rate | 9.5 gal/min |
| Splines | 0 |
| Case Drain Code | 0 |
| Geroter/Geroler Options | Free Running |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| RPM [Min] | 1021 rpm |
| Special Features Assembly Code | 0 |
| Seal Material | Buna-N |
| Series | H Series |
| Duty | Standard-Duty |
| Mount Type | 2 Bolt |
| Displacement (in³/rev) | 2.2 |
| Output Shaft Code | 24 |
| Special Features | Free Running Gerotor |
| Case Drain | None |
| RPM [Max] | 1021 rpm |
| Shaft Size & Type | Straight |
| Port Location | Side Port |
| Flange Orientation | Standard |
| Pilot Diameter | 3.25 in |
| Port Type | SAE O-Ring |
| Inlet Pressure [Max] | 2500 psi |
| Material | Cast Iron |
| Corrosion Resistant | No |
| Weight | 13.0 LB |
