Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF-2B SAE O-Ring Port
- 5.86 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Displacement (in³/rev) | 5.86 |
| Motor Element | Gerotor |
| Rotation | Standard Rotation |
| Pressure [Max] | 1800 psi |
| Mounting Hole Size | 0.565 in |
| Inlet Pressure [Max] | 2500 psi |
| Corrosion Resistant | No |
| Output Shaft Code | 01 |
| Motor Type | Spool Valve |
| Material | Cast Iron |
| Case Drain | 0.4375-20 UNF-2B SAE O-Ring Port (End Cap) |
| Port Type | SAE O-Ring |
| Flow [Max] | 15 gal/min |
| Splines | 0 |
| Mount Type | 2 Bolt |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| RPM [Max] | 585 rpm |
| Shaft Type | Straight w/ Woodruff Key |
| Port Size & Location | SAE-10 Side |
| Seal Material | Buna-N |
| Mounting Holes | 0.535 in |
| Mounting Type Code | A |
| Special Features Hardware Code | 00 |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Flange Orientation | Standard |
| Output Torque at Rated PSI (inch/pounds) | 1372 in lb |
| Special Features Assembly Code | 0 |
| Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
| Pilot Diameter | 3.25 in |
| Port Code | A |
| RPM [Min] | 585 rpm |
| Duty | Standard-Duty |
| Bolt Circle Dia. | 4.187 in |
| Series | H Series |
| Port Size | SAE-10, 7/8-14 UNF-2B |
| Paint Code | A |
| Special Features | None |
| Port Location | Side Port |
| Case Drain Code | 1 |
| Flow Rate | 14 gal/min |
| Weight | 13.0 LB |
