Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF-2B SAE O-Ring Port
- 5.86 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Splines | 0 |
| Motor Type | Spool Valve |
| Mounting Holes | 0.535 in |
| Port Size | SAE-10, 7/8-14 UNF-2B |
| Motor Element | Gerotor |
| Shaft Type | Straight w/ Woodruff Key |
| Special Features | None |
| Displacement (in³/rev) | 5.86 |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Special Features Hardware Code | 00 |
| Port Type | SAE O-Ring |
| Flow Rate | 14 gal/min |
| Flow [Max] | 15 gal/min |
| RPM [Min] | 585 rpm |
| Output Torque at Rated PSI (inch/pounds) | 1372 in lb |
| Port Code | A |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Mounting Type Code | A |
| Case Drain Code | 1 |
| Paint Code | A |
| Port Size & Location | SAE-10 Side |
| RPM [Max] | 585 rpm |
| Bolt Circle Dia. | 4.187 in |
| Special Features Assembly Code | 0 |
| Mount Type | 2 Bolt |
| Material | Cast Iron |
| Flange Orientation | Standard |
| Output Shaft Code | 01 |
| Port Location | Side Port |
| Pilot Diameter | 3.25 in |
| Duty | Standard-Duty |
| Series | H Series |
| Mounting Hole Size | 0.565 in |
| Corrosion Resistant | No |
| Seal Material | Buna-N |
| Inlet Pressure [Max] | 2500 psi |
| Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
| Case Drain | 0.4375-20 UNF-2B SAE O-Ring Port (End Cap) |
| Pressure [Max] | 1800 psi |
| Rotation | Standard Rotation |
| Weight | 13.0 LB |
