Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 7.3 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Flow Rate | 15 gal/min |
| Special Features Assembly Code | 0 |
| Output Torque at Rated PSI (inch/pounds) | 1699 in lb |
| Port Location | Side Port |
| Flow [Max] | 15 gal/min |
| Motor Type | Spool Valve |
| Duty | Standard-Duty |
| Motor Element | Gerotor |
| Port Size | 1/2, 1/2-14 |
| Output Shaft Code | 01 |
| Port Size & Location | 1/2 in NPTF Side |
| Rotation | Standard Rotation |
| Port Code | B |
| Inlet Pressure [Max] | 2500 psi |
| RPM [Min] | 469 rpm |
| Shaft Type | Straight w/ Woodruff Key |
| Mounting Holes | 0.535 in |
| Series | H Series |
| RPM [Max] | 469 rpm |
| Special Features Hardware Code | 00 |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Splines | 0 |
| Seal Material | Buna-N |
| Pilot Diameter | 3.25 in |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Mounting Hole Size | 0.535 in |
| Maximum Speed @ Continuous Flow | 469 rpm @ 15 gal/min |
| Pressure [Max] | 1800 psi |
| Case Drain Code | 1 |
| Corrosion Resistant | No |
| Mount Type | 2 Bolt |
| Case Drain | 0.4375-20 UNF-2B SAE O-Ring Port (End Cap) |
| Flange Orientation | Standard |
| Special Features | None |
| Displacement (in³/rev) | 7.3 |
| Paint Code | A |
| Mounting Type Code | A |
| Port Type | NPTF |
| Material | Cast Iron |
| Bolt Circle Dia. | 4.19 in |
| Weight | 13.0 LB |
