Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 7.3 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Seal Material | Buna-N |
| Port Size & Location | 1/2 in NPTF Side |
| Port Size | 1/2, 1/2-14 |
| Material | Cast Iron |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Flow [Max] | 15 gal/min |
| Mounting Type Code | A |
| Port Location | Side Port |
| Mounting Holes | 0.535 in |
| Mounting Hole Size | 0.535 in |
| Port Code | B |
| Shaft Type | Straight w/ Woodruff Key |
| Motor Element | Gerotor |
| Displacement (in³/rev) | 7.3 |
| Inlet Pressure [Max] | 2500 psi |
| Rotation | Standard Rotation |
| Motor Type | Spool Valve |
| Special Features | None |
| Splines | 0 |
| Corrosion Resistant | No |
| Bolt Circle Dia. | 4.19 in |
| Pressure [Max] | 1800 psi |
| Port Type | NPTF |
| Maximum Speed @ Continuous Flow | 469 rpm @ 15 gal/min |
| Case Drain Code | 1 |
| Series | H Series |
| Flow Rate | 15 gal/min |
| Output Torque at Rated PSI (inch/pounds) | 1699 in lb |
| Special Features Hardware Code | 00 |
| RPM [Min] | 469 rpm |
| Case Drain | 0.4375-20 UNF-2B SAE O-Ring Port (End Cap) |
| Special Features Assembly Code | 0 |
| Duty | Standard-Duty |
| Mount Type | 2 Bolt |
| Output Shaft Code | 01 |
| RPM [Max] | 469 rpm |
| Flange Orientation | Standard |
| Pilot Diameter | 3.25 in |
| Paint Code | A |
| Weight | 13.0 LB |
