Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 4.5 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Case Drain Code | 0 |
| Output Shaft Code | 01 |
| Special Features Hardware Code | 00 |
| Inlet Pressure [Max] | 2500 psi |
| Pilot Diameter | 3.25 in |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Seal Material | Buna-N |
| Material | Cast Iron |
| Port Type | SAE O-Ring |
| Displacement (in³/rev) | 4.5 |
| Splines | 0 |
| Paint Code | A |
| RPM [Max] | 760 rpm |
| Mount Type | 2 Bolt |
| Flow [Max] | 15 gal/min |
| Corrosion Resistant | No |
| Series | H Series |
| Special Features | Flange Rotated 90° |
| Maximum Speed @ Continuous Flow | 760 rpm @ 15 gal/min |
| Flange Orientation | Flange Rotated 90° |
| Port Location | Side Port |
| Rotation | Standard Rotation |
| Case Drain | None |
| Pressure [Max] | 1800 psi |
| Mounting Type Code | A |
| Bolt Circle Dia. | 4.19 in |
| Duty | Standard-Duty |
| Motor Element | Gerotor |
| Port Size | SAE-10, 7/8-14 UNF |
| Motor Type | Spool Valve |
| RPM [Min] | 760 rpm |
| Shaft Type | Straight w/ Woodruff Key |
| Port Code | A |
| Port Size & Location | SAE-10 Side |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Flow Rate | 15 gal/min |
| Mounting Holes | 0.535 in |
| Special Features Assembly Code | 2 |
| Mounting Hole Size | 0.535 in |
| Output Torque at Rated PSI (inch/pounds) | 1044 in lb |
| Weight | 13.0 LB |
