Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 4.5 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Motor Element | Gerotor |
| Pressure [Max] | 1800 psi |
| Duty | Standard-Duty |
| Motor Type | Spool Valve |
| Corrosion Resistant | No |
| Mounting Holes | 0.535 in |
| Case Drain Code | 0 |
| Material | Cast Iron |
| Splines | 0 |
| Output Shaft Code | 01 |
| Port Size & Location | SAE-10 Side |
| Port Size | SAE-10, 7/8-14 UNF |
| Mount Type | 2 Bolt |
| Maximum Speed @ Continuous Flow | 760 rpm @ 15 gal/min |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Mounting Hole Size | 0.535 in |
| Flange Orientation | Flange Rotated 90° |
| Displacement (in³/rev) | 4.5 |
| Special Features | Flange Rotated 90° |
| Inlet Pressure [Max] | 2500 psi |
| Shaft Type | Straight w/ Woodruff Key |
| Paint Code | A |
| RPM [Max] | 760 rpm |
| Flow Rate | 15 gal/min |
| Port Location | Side Port |
| Flow [Max] | 15 gal/min |
| Output Torque at Rated PSI (inch/pounds) | 1044 in lb |
| Series | H Series |
| Seal Material | Buna-N |
| Special Features Hardware Code | 00 |
| Pilot Diameter | 3.25 in |
| Port Type | SAE O-Ring |
| Special Features Assembly Code | 2 |
| Rotation | Standard Rotation |
| Mounting Type Code | A |
| Case Drain | None |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| RPM [Min] | 760 rpm |
| Port Code | A |
| Bolt Circle Dia. | 4.19 in |
| Weight | 13.0 LB |
