Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 5/16-18 UNC Manifold Port
- 17.9 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Seal Material | Buna-N |
| Mount Type | 2 Bolt |
| Output Shaft Code | 01 |
| Maximum Speed @ Continuous Flow | 192 rpm @ 15 gal/min |
| Flange Orientation | Standard |
| Special Features Assembly Code | 0 |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Shaft Type | Straight w/ Woodruff Key |
| Duty | Standard-Duty |
| Flow [Max] | 15 gal/min |
| Port Type | Manifold |
| RPM [Max] | 192 rpm |
| Flow Rate | 15 gal/min |
| Pilot Diameter | 3.25 in |
| Geroter/Geroler Options | Free Running |
| Material | Cast Iron |
| Port Code | C |
| Motor Element | Gerotor |
| Mounting Hole Size | 0.535 in |
| Case Drain | None |
| Case Drain Code | 0 |
| Mounting Holes | 0.535 in |
| Mounting Type Code | A |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Paint Code | A |
| Displacement (in³/rev) | 17.9 |
| RPM [Min] | 192 rpm |
| Motor Type | Spool Valve |
| Bolt Circle Dia. | 4.19 in |
| Splines | 0 |
| Port Location | Side Port |
| Special Features Hardware Code | AA |
| Corrosion Resistant | No |
| Output Torque at Rated PSI (inch/pounds) | 3106.61 in lb |
| Special Features | Free Running Gerotor |
| Rotation | Standard Rotation |
| Pressure [Max] | 1350 psi |
| Series | H Series |
| Inlet Pressure [Max] | 2500 psi |
| Weight | 13.0 LB |
