Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 5/16-18 UNC Manifold Port
- 17.9 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Bolt Circle Dia. | 4.19 in |
| Shaft Type | Straight w/ Woodruff Key |
| Duty | Standard-Duty |
| Port Code | C |
| Paint Code | A |
| Case Drain Code | 0 |
| Motor Type | Spool Valve |
| Pilot Diameter | 3.25 in |
| Output Torque at Rated PSI (inch/pounds) | 3106.61 in lb |
| Mounting Type Code | A |
| Geroter/Geroler Options | Free Running |
| Inlet Pressure [Max] | 2500 psi |
| Flow Rate | 15 gal/min |
| Case Drain | None |
| Maximum Speed @ Continuous Flow | 192 rpm @ 15 gal/min |
| Special Features Hardware Code | AA |
| Port Type | Manifold |
| Mounting Hole Size | 0.535 in |
| Flow [Max] | 15 gal/min |
| Mounting Holes | 0.535 in |
| Port Location | Side Port |
| Special Features Assembly Code | 0 |
| Rotation | Standard Rotation |
| Corrosion Resistant | No |
| Displacement (in³/rev) | 17.9 |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Seal Material | Buna-N |
| Splines | 0 |
| Series | H Series |
| Flange Orientation | Standard |
| Material | Cast Iron |
| RPM [Min] | 192 rpm |
| Mount Type | 2 Bolt |
| Pressure [Max] | 1350 psi |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC |
| Paint/Packaging | Low Gloss Black, Individual Box |
| RPM [Max] | 192 rpm |
| Output Shaft Code | 01 |
| Special Features | Free Running Gerotor |
| Motor Element | Gerotor |
| Weight | 13.0 LB |
