Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- Port
- 2.81 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Output Shaft Code | 24 |
| Output Torque at Rated PSI (inch/pounds) | 650 in lb |
| Duty | Standard-Duty |
| Port Location | Side Port |
| Flow [Max] | 12 gal/min |
| Inlet Pressure [Max] | 2500 psi |
| RPM [Max] | 969 rpm |
| Special Features Assembly Code | 0 |
| Motor Type | Spool Valve |
| Pilot Diameter | 3.25 in |
| Maximum Speed @ Continuous Flow | 969 rpm @ 12 gal/min |
| Flange Orientation | Standard |
| Corrosion Resistant | No |
| Special Features Hardware Code | 00 |
| Material | Cast Iron |
| Case Drain Code | 0 |
| Flow Rate | 45 lpm |
| RPM [Min] | 969 rpm |
| Bolt Circle Dia. | 4.187 in |
| Port Size & Location | 1/2 in NPTF Side |
| Mounting Holes | 0.535 in |
| Splines | 0 |
| Port Size | 1/2 |
| Case Drain | None |
| Motor Element | Gerotor |
| Mount Type | 2 Bolt |
| Seal Material | Buna-N |
| Pressure [Max] | 1800 psi |
| Port Code | B |
| Port Type | NPTF |
| Rotation | Standard Rotation |
| Shaft Size & Type | Straight |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Mounting Type Code | A |
| Paint Code | A |
| Special Features | None |
| Series | H Series |
| Mounting Hole Size | 0.565 in |
| Displacement (in³/rev) | 2.81 |
| Shaft Type | Straight |
| Weight | 13.0 LB |
