Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- Port
- 2.81 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Paint/Packaging | Low Gloss Black, Individual Box |
| Special Features | None |
| Pilot Diameter | 3.25 in |
| Shaft Type | Straight |
| Shaft Size & Type | Straight |
| Mounting Holes | 0.535 in |
| Mount Type | 2 Bolt |
| Flow [Max] | 12 gal/min |
| Flange Orientation | Standard |
| Maximum Speed @ Continuous Flow | 969 rpm @ 12 gal/min |
| Mounting Hole Size | 0.565 in |
| Inlet Pressure [Max] | 2500 psi |
| Rotation | Standard Rotation |
| Seal Material | Buna-N |
| Displacement (in³/rev) | 2.81 |
| Corrosion Resistant | No |
| Motor Element | Gerotor |
| Port Code | B |
| Duty | Standard-Duty |
| Output Shaft Code | 24 |
| Case Drain Code | 0 |
| Port Type | NPTF |
| RPM [Max] | 969 rpm |
| Bolt Circle Dia. | 4.187 in |
| Case Drain | None |
| Motor Type | Spool Valve |
| Splines | 0 |
| Special Features Assembly Code | 0 |
| Paint Code | A |
| Series | H Series |
| Special Features Hardware Code | 00 |
| Port Location | Side Port |
| Output Torque at Rated PSI (inch/pounds) | 650 in lb |
| Pressure [Max] | 1800 psi |
| Material | Cast Iron |
| Port Size | 1/2 |
| Flow Rate | 45 lpm |
| RPM [Min] | 969 rpm |
| Port Size & Location | 1/2 in NPTF Side |
| Mounting Type Code | A |
| Weight | 13.0 LB |
