Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF-2B SAE O-Ring Port
- 4.52 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Mounting Hole Size | 0.565 in |
| Displacement (in³/rev) | 4.52 |
| Maximum Speed @ Continuous Flow | 760 rpm @ 15 gal/min |
| Flange Orientation | Standard |
| Motor Type | Spool Valve |
| Splines | 0 |
| Port Location | Side Port |
| Pressure [Max] | 1800 psi |
| Duty | Standard-Duty |
| Port Size | SAE-10, 7/8-14 UNF-2B |
| Output Torque at Rated PSI (inch/pounds) | 1044 in lb |
| Case Drain | None |
| Mounting Type Code | A |
| Port Size & Location | SAE-10 Side |
| Seal Material | Buna-N |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Mounting Holes | 0.535 in |
| Paint Code | A |
| Port Code | A |
| Case Drain Code | 0 |
| Corrosion Resistant | No |
| Motor Element | Gerotor |
| Shaft Size & Type | Straight |
| Special Features Assembly Code | 0 |
| Shaft Type | Straight |
| Bolt Circle Dia. | 4.187 in |
| Series | H Series |
| Special Features Hardware Code | 00 |
| Inlet Pressure [Max] | 2500 psi |
| Material | Cast Iron |
| RPM [Max] | 760 rpm |
| Port Type | SAE O-Ring |
| Special Features | None |
| Rotation | Standard Rotation |
| Output Shaft Code | 24 |
| Flow [Max] | 15 gal/min |
| Pilot Diameter | 3.25 in |
| Mount Type | 2 Bolt |
| Flow Rate | 14 gal/min |
| Weight | 13.0 LB |
