Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF-2B SAE O-Ring Port
- 4.52 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Case Drain Code | 0 |
| Special Features | None |
| Output Shaft Code | 24 |
| Flow Rate | 14 gal/min |
| Case Drain | None |
| Motor Type | Spool Valve |
| Corrosion Resistant | No |
| Series | H Series |
| Duty | Standard-Duty |
| Pilot Diameter | 3.25 in |
| Port Type | SAE O-Ring |
| Pressure [Max] | 1800 psi |
| Port Size & Location | SAE-10 Side |
| Mounting Holes | 0.535 in |
| Mounting Type Code | A |
| Mount Type | 2 Bolt |
| Flange Orientation | Standard |
| Special Features Hardware Code | 00 |
| Bolt Circle Dia. | 4.187 in |
| RPM [Max] | 760 rpm |
| Shaft Type | Straight |
| Port Location | Side Port |
| Rotation | Standard Rotation |
| Port Code | A |
| Shaft Size & Type | Straight |
| Special Features Assembly Code | 0 |
| Port Size | SAE-10, 7/8-14 UNF-2B |
| Maximum Speed @ Continuous Flow | 760 rpm @ 15 gal/min |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Motor Element | Gerotor |
| Splines | 0 |
| Seal Material | Buna-N |
| Displacement (in³/rev) | 4.52 |
| Flow [Max] | 15 gal/min |
| Output Torque at Rated PSI (inch/pounds) | 1044 in lb |
| Inlet Pressure [Max] | 2500 psi |
| Material | Cast Iron |
| Mounting Hole Size | 0.565 in |
| Paint Code | A |
| Weight | 13.0 LB |
