Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- Port
- 9.7 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| RPM [Max] | 353 rpm |
| Series | H Series |
| Material | Cast Iron |
| Seal Material | Buna-N |
| Motor Element | Gerotor |
| Port Size & Location | 1/2 in NPTF Side |
| Output Shaft Code | 27 |
| Rotation | Standard Rotation |
| Shaft Type | Straight w/ Woodruff Key, Corrosion Resistant |
| Special Features | None |
| Pressure [Max] | 1650 psi |
| Port Type | NPTF |
| Paint/Packaging | Environmental Coated Gloss White |
| Inlet Pressure [Max] | 2500 psi |
| RPM [Min] | 353 rpm |
| Port Size | 1/2 |
| Flow [Max] | 15 gal/min |
| Mounting Type Code | B |
| Corrosion Resistant | Yes |
| Bolt Circle Dia. | 3 1/4 in |
| Displacement (in³/rev) | 9.7 |
| Maximum Speed @ Continuous Flow | 353 rpm @ 15 gal/min |
| Mounting Hole Size | 3/8 in |
| Flange Orientation | Standard |
| Mounting Holes | 3/8-16 |
| Case Drain Code | 0 |
| Special Features Hardware Code | 00 |
| Port Location | Side Port |
| Pilot Diameter | 1.75 in |
| Output Torque at Rated PSI (inch/pounds) | 2059 in lb |
| Flow Rate | 57 lpm |
| Port Code | B |
| Mount Type | 4 Bolt |
| Splines | 0 |
| Paint Code | D |
| Shaft Size & Type | Straight |
| Special Features Assembly Code | 0 |
| Case Drain | None |
| Duty | Corrosion Resistant-Duty |
| Motor Type | Spool Valve |
| Weight | 12.5 LB |
