Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- Port
- 9.7 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Paint/Packaging | Environmental Coated Gloss White |
| Mounting Type Code | B |
| Seal Material | Buna-N |
| Port Size | 1/2 |
| Pilot Diameter | 1.75 in |
| Mount Type | 4 Bolt |
| Flow [Max] | 15 gal/min |
| Maximum Speed @ Continuous Flow | 353 rpm @ 15 gal/min |
| Rotation | Standard Rotation |
| Case Drain | None |
| Splines | 0 |
| Mounting Holes | 3/8-16 |
| Port Code | B |
| Special Features Assembly Code | 0 |
| Motor Type | Spool Valve |
| Pressure [Max] | 1650 psi |
| Series | H Series |
| Port Type | NPTF |
| Flange Orientation | Standard |
| RPM [Max] | 353 rpm |
| Duty | Corrosion Resistant-Duty |
| Shaft Type | Straight w/ Woodruff Key, Corrosion Resistant |
| Port Location | Side Port |
| Corrosion Resistant | Yes |
| Shaft Size & Type | Straight |
| Displacement (in³/rev) | 9.7 |
| RPM [Min] | 353 rpm |
| Inlet Pressure [Max] | 2500 psi |
| Bolt Circle Dia. | 3 1/4 in |
| Case Drain Code | 0 |
| Port Size & Location | 1/2 in NPTF Side |
| Mounting Hole Size | 3/8 in |
| Special Features | None |
| Output Torque at Rated PSI (inch/pounds) | 2059 in lb |
| Paint Code | D |
| Special Features Hardware Code | 00 |
| Flow Rate | 57 lpm |
| Motor Element | Gerotor |
| Material | Cast Iron |
| Output Shaft Code | 27 |
| Weight | 12.5 LB |
