Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 2.81 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Mount Type | 4 Bolt |
| Mounting Holes | 3/8-16 |
| Output Torque at Rated PSI (inch/pounds) | 646 in lb |
| Port Type | NPTF |
| Output Shaft Code | 27 |
| Special Features | None |
| Mounting Type Code | B |
| Port Code | B |
| Corrosion Resistant | Yes |
| Mounting Hole Size | 3/8 in |
| Special Features Hardware Code | 00 |
| Flow Rate | 11.25 gal/min |
| Shaft Options | Nickel Plated |
| Flange Orientation | Standard |
| Case Drain Code | 0 |
| Series | H Series |
| Shaft Size & Type | Straight |
| Port Location | Side Port |
| Duty | Corrosion Resistant-Duty |
| Shaft Type | Straight w/ Woodruff Key, Corrosion Resistant |
| Material | Cast Iron |
| Motor Type | Spool Valve |
| Flow [Max] | 12 gal/min |
| Motor Element | Gerotor |
| Displacement (in³/rev) | 2.81 |
| Splines | 0 |
| Special Features Assembly Code | 0 |
| Port Size & Location | 1/2 in NPTF Side |
| Maximum Speed @ Continuous Flow | 969 rpm @ 12 gal/min |
| Bolt Circle Dia. | 3 1/4 in |
| Paint Code | D |
| RPM [Max] | 969 rpm |
| Port Size | 1/2, 1/2-14 |
| Pressure [Max] | 1800 psi |
| Case Drain | None |
| Rotation | Standard Rotation |
| Seal Material | Buna-N |
| Paint/Packaging | Environmental Coated Gloss White, Individual Box |
| Inlet Pressure [Max] | 2500 psi |
| Pilot Diameter | 1.75 in |
| Weight | 11.2 LB |
