Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 2.81 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Shaft Size & Type | Straight |
| Special Features | None |
| Motor Type | Spool Valve |
| Bolt Circle Dia. | 3 1/4 in |
| Material | Cast Iron |
| Motor Element | Gerotor |
| Port Location | Side Port |
| Special Features Hardware Code | 00 |
| Output Torque at Rated PSI (inch/pounds) | 646 in lb |
| Port Size & Location | 1/2 in NPTF Side |
| Corrosion Resistant | Yes |
| Splines | 0 |
| Flange Orientation | Standard |
| Mounting Holes | 3/8-16 |
| Pilot Diameter | 1.75 in |
| Port Size | 1/2, 1/2-14 |
| Series | H Series |
| Shaft Type | Straight w/ Woodruff Key, Corrosion Resistant |
| Seal Material | Buna-N |
| Rotation | Standard Rotation |
| Case Drain Code | 0 |
| Maximum Speed @ Continuous Flow | 969 rpm @ 12 gal/min |
| RPM [Max] | 969 rpm |
| Flow Rate | 11.25 gal/min |
| Pressure [Max] | 1800 psi |
| Paint Code | D |
| Paint/Packaging | Environmental Coated Gloss White, Individual Box |
| Shaft Options | Nickel Plated |
| Flow [Max] | 12 gal/min |
| Duty | Corrosion Resistant-Duty |
| Port Type | NPTF |
| Case Drain | None |
| Inlet Pressure [Max] | 2500 psi |
| Displacement (in³/rev) | 2.81 |
| Port Code | B |
| Output Shaft Code | 27 |
| Mounting Hole Size | 3/8 in |
| Special Features Assembly Code | 0 |
| Mounting Type Code | B |
| Mount Type | 4 Bolt |
| Weight | 11.2 LB |
