Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 5.9 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Shaft Options | Nickel Plated |
| Special Features Assembly Code | 0 |
| Pilot Diameter | 1.75 in |
| Series | H Series |
| Bolt Circle Dia. | 3 1/4 in |
| Port Type | NPTF |
| Output Torque at Rated PSI (inch/pounds) | 1368 in lb |
| Splines | 0 |
| Corrosion Resistant | Yes |
| Port Code | B |
| Pressure [Max] | 1800 psi |
| Motor Element | Gerotor |
| Seal Material | Buna-N |
| Paint/Packaging | Environmental Coated Gloss White, Individual Box |
| RPM [Min] | 585 rpm |
| Flow Rate | 15 gal/min |
| Duty | Corrosion Resistant-Duty |
| Special Features Hardware Code | 00 |
| Flow [Max] | 15 gal/min |
| Mount Type | 4 Bolt |
| Special Features | None |
| Port Size | 1/2, 1/2-14 |
| Motor Type | Spool Valve |
| Port Size & Location | 1/2 in NPTF Side |
| Case Drain | None |
| Rotation | Standard Rotation |
| Shaft Type | Straight w/ Woodruff Key, Corrosion Resistant |
| Port Location | Side Port |
| Paint Code | D |
| Displacement (in³/rev) | 5.9 |
| Mounting Type Code | B |
| Case Drain Code | 0 |
| Inlet Pressure [Max] | 2500 psi |
| Mounting Hole Size | 3/8 in |
| Shaft Size & Type | Straight |
| Output Shaft Code | 27 |
| Mounting Holes | 3/8-16 |
| Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
| Material | Cast Iron |
| RPM [Max] | 585 rpm |
| Flange Orientation | Standard |
| Weight | 11.8 LB |
