Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 5.9 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Mounting Holes | 3/8-16 |
| Series | H Series |
| Flow [Max] | 15 gal/min |
| Paint/Packaging | Environmental Coated Gloss White, Individual Box |
| Special Features Hardware Code | 00 |
| Displacement (in³/rev) | 5.9 |
| Duty | Corrosion Resistant-Duty |
| Splines | 0 |
| Special Features Assembly Code | 0 |
| Pilot Diameter | 1.75 in |
| Corrosion Resistant | Yes |
| Mount Type | 4 Bolt |
| Special Features | None |
| Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
| Case Drain | None |
| Shaft Type | Straight w/ Woodruff Key, Corrosion Resistant |
| Rotation | Standard Rotation |
| Port Type | NPTF |
| Motor Element | Gerotor |
| Flange Orientation | Standard |
| Seal Material | Buna-N |
| Motor Type | Spool Valve |
| Material | Cast Iron |
| Bolt Circle Dia. | 3 1/4 in |
| RPM [Min] | 585 rpm |
| Pressure [Max] | 1800 psi |
| Inlet Pressure [Max] | 2500 psi |
| Output Torque at Rated PSI (inch/pounds) | 1368 in lb |
| Shaft Size & Type | Straight |
| Mounting Hole Size | 3/8 in |
| Case Drain Code | 0 |
| Output Shaft Code | 27 |
| Shaft Options | Nickel Plated |
| Paint Code | D |
| Mounting Type Code | B |
| Port Size & Location | 1/2 in NPTF Side |
| RPM [Max] | 585 rpm |
| Port Size | 1/2, 1/2-14 |
| Flow Rate | 15 gal/min |
| Port Code | B |
| Port Location | Side Port |
| Weight | 11.8 LB |
