Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF-2B SAE O-Ring Port
- 7.32 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Series | H Series |
| Mounting Holes | 3/8-16 |
| Port Code | A |
| Displacement (in³/rev) | 7.32 |
| Inlet Pressure [Max] | 2500 psi |
| Duty | Standard-Duty |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Pilot Diameter | 1.75 in |
| Rotation | Standard Rotation |
| RPM [Max] | 469 rpm |
| Mounting Hole Size | 3/8 in |
| Special Features | None |
| Flange Orientation | Standard |
| Mounting Type Code | B |
| Port Size & Location | SAE-10 Side |
| Flow [Max] | 15 gal/min |
| Shaft Type | Splined |
| Case Drain | None |
| Output Shaft Code | 02 |
| Bolt Circle Dia. | 3 1/4 in |
| Motor Type | Spool Valve |
| Seal Material | Buna-N |
| Splines | 6 |
| Port Location | Side Port |
| Flow Rate | 14 gal/min |
| Port Size | SAE-10, 7/8-14 UNF-2B |
| Pressure [Max] | 1800 psi |
| Mount Type | 4 Bolt |
| Material | Cast Iron |
| Port Type | SAE O-Ring |
| Shaft Size & Type | 1 in - 6T Spline |
| RPM [Min] | 469 rpm |
| Output Torque at Rated PSI (inch/pounds) | 1699 in lb |
| Maximum Speed @ Continuous Flow | 469 rpm @ 15 gal/min |
| Special Features Assembly Code | 0 |
| Paint Code | A |
| Special Features Hardware Code | 00 |
| Corrosion Resistant | No |
| Case Drain Code | 0 |
| Motor Element | Gerotor |
| Weight | 12.1 LB |
