Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF-2B SAE O-Ring Port
- 7.32 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Bolt Circle Dia. | 3 1/4 in |
| Pilot Diameter | 1.75 in |
| Case Drain | None |
| Special Features Assembly Code | 0 |
| Port Type | SAE O-Ring |
| Maximum Speed @ Continuous Flow | 469 rpm @ 15 gal/min |
| Port Location | Side Port |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Output Shaft Code | 02 |
| Flow Rate | 14 gal/min |
| Seal Material | Buna-N |
| Shaft Type | Splined |
| Corrosion Resistant | No |
| Mount Type | 4 Bolt |
| RPM [Max] | 469 rpm |
| Series | H Series |
| Pressure [Max] | 1800 psi |
| Port Code | A |
| Output Torque at Rated PSI (inch/pounds) | 1699 in lb |
| Rotation | Standard Rotation |
| Shaft Size & Type | 1 in - 6T Spline |
| Motor Type | Spool Valve |
| Case Drain Code | 0 |
| Flange Orientation | Standard |
| Mounting Holes | 3/8-16 |
| Motor Element | Gerotor |
| Paint Code | A |
| Mounting Type Code | B |
| Port Size | SAE-10, 7/8-14 UNF-2B |
| Inlet Pressure [Max] | 2500 psi |
| Displacement (in³/rev) | 7.32 |
| RPM [Min] | 469 rpm |
| Special Features Hardware Code | 00 |
| Material | Cast Iron |
| Splines | 6 |
| Duty | Standard-Duty |
| Port Size & Location | SAE-10 Side |
| Special Features | None |
| Flow [Max] | 15 gal/min |
| Mounting Hole Size | 3/8 in |
| Weight | 12.1 LB |
