Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 7.3 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Inlet Pressure [Max] | 2500 psi |
| Flange Orientation | Standard |
| Port Location | Side Port |
| Case Drain | None |
| Material | Cast Iron |
| Output Torque at Rated PSI (inch/pounds) | 1699 in lb |
| Mount Type | 4 Bolt |
| Splines | 0 |
| Viscocity (SUS) [Max] | 100 |
| Pilot Diameter | 1.75 in |
| Port Size & Location | 1/2 in NPTF Side |
| Mounting Type Code | B |
| Special Features Assembly Code | 0 |
| Shaft Size | 1 |
| Case Drain Code | 0 |
| Paint Code | A |
| Duty | Standard-Duty |
| Output Shaft Code | 08 |
| Motor Type | Spool Valve |
| Shaft Type | Straight w/ Cross Hole |
| Series | H Series |
| Mounting Hole Size | 3/8 in |
| Pressure [Max] | 1800 psi |
| Port Size | 1/2, 1/2-14 |
| Displacement (in³/rev) | 7.3 |
| RPM [Min] | 469 rpm |
| Special Features | None |
| Maximum Speed @ Continuous Flow | 469 rpm @ 15 gal/min |
| Flow Rate | 15 gal/min |
| Port Type | NPTF |
| RPM [Max] | 469 rpm |
| Bolt Circle Dia. | 3 1/4 in |
| Mounting Holes | 3/8-16 |
| Seal Material | Buna-N |
| Shaft Size & Type | Straight |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Corrosion Resistant | No |
| Motor Element | Gerotor |
| Rotation | Standard Rotation |
| Special Features Hardware Code | 00 |
| Flow [Max] | 15 gal/min |
| Port Code | B |
| Weight | 12.1 LB |
