Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 7.3 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Case Drain Code | 0 |
| Port Location | Side Port |
| Maximum Speed @ Continuous Flow | 469 rpm @ 15 gal/min |
| Material | Cast Iron |
| Corrosion Resistant | No |
| Motor Type | Spool Valve |
| Duty | Standard-Duty |
| Port Size | 1/2, 1/2-14 |
| Special Features | None |
| Pressure [Max] | 1800 psi |
| Port Size & Location | 1/2 in NPTF Side |
| Paint Code | A |
| Output Shaft Code | 08 |
| Flange Orientation | Standard |
| Mounting Type Code | B |
| Flow [Max] | 15 gal/min |
| Splines | 0 |
| Series | H Series |
| Special Features Assembly Code | 0 |
| Shaft Size & Type | Straight |
| Bolt Circle Dia. | 3 1/4 in |
| Port Type | NPTF |
| RPM [Max] | 469 rpm |
| Mounting Holes | 3/8-16 |
| Displacement (in³/rev) | 7.3 |
| Viscocity (SUS) [Max] | 100 |
| Port Code | B |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Shaft Size | 1 |
| Case Drain | None |
| Seal Material | Buna-N |
| Special Features Hardware Code | 00 |
| RPM [Min] | 469 rpm |
| Rotation | Standard Rotation |
| Shaft Type | Straight w/ Cross Hole |
| Inlet Pressure [Max] | 2500 psi |
| Pilot Diameter | 1.75 in |
| Flow Rate | 15 gal/min |
| Mount Type | 4 Bolt |
| Mounting Hole Size | 3/8 in |
| Motor Element | Gerotor |
| Output Torque at Rated PSI (inch/pounds) | 1699 in lb |
| Weight | 12.1 LB |
