Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF-2B SAE O-Ring Port
- 9.7 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Motor Element | Gerotor |
| Inlet Pressure [Max] | 2500 psi |
| Material | Cast Iron |
| Special Features Assembly Code | 0 |
| Port Code | A |
| Mounting Hole Size | 3/8 in |
| Maximum Speed @ Continuous Flow | 353 rpm @ 15 gal/min |
| Port Size & Location | SAE-10 Side |
| Mount Type | 4 Bolt |
| Special Features Hardware Code | 00 |
| Flow Rate | 14 gal/min |
| Shaft Size & Type | Straight |
| Seal Material | Buna-N |
| Mounting Holes | 3/8-16 |
| Output Torque at Rated PSI (inch/pounds) | 2062 in lb |
| Motor Type | Spool Valve |
| Pilot Diameter | 1.75 in |
| Case Drain Code | 0 |
| Splines | 0 |
| Port Type | SAE O-Ring |
| Port Location | Side Port |
| Case Drain | None |
| Series | H Series |
| Rotation | Standard Rotation |
| RPM [Max] | 353 rpm |
| Bolt Circle Dia. | 3 1/4 in |
| Flange Orientation | Standard |
| Pressure [Max] | 1650 psi |
| Displacement (in³/rev) | 9.7 |
| Output Shaft Code | 08 |
| Duty | Standard-Duty |
| RPM [Min] | 353 rpm |
| Shaft Type | Straight w/ Cross Hole |
| Flow [Max] | 15 gal/min |
| Paint Code | A |
| Port Size | SAE-10, 7/8-14 UNF-2B |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Corrosion Resistant | No |
| Special Features | None |
| Mounting Type Code | B |
| Weight | 12.5 LB |
