Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF-2B SAE O-Ring Port
- 9.7 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Maximum Speed @ Continuous Flow | 353 rpm @ 15 gal/min |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Special Features Hardware Code | 00 |
| Corrosion Resistant | No |
| Rotation | Standard Rotation |
| Port Size | SAE-10, 7/8-14 UNF-2B |
| Material | Cast Iron |
| Port Type | SAE O-Ring |
| Flow [Max] | 15 gal/min |
| Motor Type | Spool Valve |
| Mount Type | 4 Bolt |
| Bolt Circle Dia. | 3 1/4 in |
| Case Drain Code | 0 |
| Output Shaft Code | 08 |
| Splines | 0 |
| Series | H Series |
| Paint Code | A |
| Pressure [Max] | 1650 psi |
| Seal Material | Buna-N |
| Shaft Type | Straight w/ Cross Hole |
| Output Torque at Rated PSI (inch/pounds) | 2062 in lb |
| Mounting Holes | 3/8-16 |
| Displacement (in³/rev) | 9.7 |
| RPM [Max] | 353 rpm |
| Flow Rate | 14 gal/min |
| Mounting Hole Size | 3/8 in |
| Special Features | None |
| Duty | Standard-Duty |
| RPM [Min] | 353 rpm |
| Port Size & Location | SAE-10 Side |
| Case Drain | None |
| Pilot Diameter | 1.75 in |
| Flange Orientation | Standard |
| Port Location | Side Port |
| Special Features Assembly Code | 0 |
| Shaft Size & Type | Straight |
| Motor Element | Gerotor |
| Inlet Pressure [Max] | 2500 psi |
| Mounting Type Code | B |
| Port Code | A |
| Weight | 12.5 LB |
