Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 2.2 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Port Size & Location | SAE-10 Side |
| Geroter/Geroler Options | Free Running |
| Shaft Type | Straight w/ Cross Hole |
| Duty | Standard-Duty |
| Motor Element | Gerotor |
| Bolt Circle Dia. | 3 1/4 in |
| Port Location | Side Port |
| Flow [Max] | 10 gal/min |
| RPM [Max] | 1021 rpm |
| Pressure [Max] | 1800 psi |
| Mounting Hole Size | 3/8 in |
| Port Code | A |
| Rotation | Standard Rotation |
| Series | H Series |
| Pilot Diameter | 1.75 in |
| Seal Material | Buna-N |
| Special Features Hardware Code | AA |
| Port Type | SAE O-Ring |
| Corrosion Resistant | No |
| Output Shaft Code | 08 |
| Flange Orientation | Standard |
| Flow Rate | 10 gal/min |
| Mount Type | 4 Bolt |
| Shaft Size & Type | Straight |
| Output Torque at Rated PSI (inch/pounds) | 495.64 in lb |
| Paint Code | A |
| Material | Cast Iron |
| Special Features | Free Running Gerotor |
| Splines | 0 |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Mounting Type Code | B |
| Special Features Assembly Code | 0 |
| Displacement (in³/rev) | 2.2 |
| Port Size | SAE-10, 7/8-14 UNF |
| Case Drain | None |
| Motor Type | Spool Valve |
| Mounting Holes | 3/8-16 |
| Inlet Pressure [Max] | 2500 psi |
| Case Drain Code | 0 |
| Maximum Speed @ Continuous Flow | 1021 rpm @ 10 gal/min |
| Weight | 11.2 LB |
