Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 2.2 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Material | Cast Iron |
| Mounting Holes | 3/8-16 |
| Flow [Max] | 10 gal/min |
| Series | H Series |
| Special Features | Free Running Gerotor |
| Motor Element | Gerotor |
| Pilot Diameter | 1.75 in |
| Corrosion Resistant | No |
| Port Location | Side Port |
| Flow Rate | 10 gal/min |
| Case Drain | None |
| Shaft Size & Type | Straight |
| Port Code | A |
| Special Features Assembly Code | 0 |
| Special Features Hardware Code | AA |
| Port Size & Location | SAE-10 Side |
| Mounting Type Code | B |
| Pressure [Max] | 1800 psi |
| Geroter/Geroler Options | Free Running |
| Displacement (in³/rev) | 2.2 |
| RPM [Max] | 1021 rpm |
| Rotation | Standard Rotation |
| Port Size | SAE-10, 7/8-14 UNF |
| Port Type | SAE O-Ring |
| Duty | Standard-Duty |
| Mount Type | 4 Bolt |
| Case Drain Code | 0 |
| Motor Type | Spool Valve |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Maximum Speed @ Continuous Flow | 1021 rpm @ 10 gal/min |
| Output Torque at Rated PSI (inch/pounds) | 495.64 in lb |
| Paint Code | A |
| Output Shaft Code | 08 |
| Inlet Pressure [Max] | 2500 psi |
| Bolt Circle Dia. | 3 1/4 in |
| Splines | 0 |
| Seal Material | Buna-N |
| Shaft Type | Straight w/ Cross Hole |
| Flange Orientation | Standard |
| Mounting Hole Size | 3/8 in |
| Weight | 11.2 LB |
