Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 5/16-18 UNC Manifold Port
- 3.5 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| RPM [Max] | 953 rpm |
| Duty | Standard-Duty |
| Case Drain | None |
| Flow [Max] | 15 gal/min |
| Special Features Hardware Code | AA |
| Output Shaft Code | 07 |
| Splines | 0 |
| Paint Code | A |
| Flow Rate | 15 gal/min |
| Special Features Assembly Code | 0 |
| Motor Type | Spool Valve |
| Flange Orientation | Standard |
| Material | Cast Iron |
| Pilot Diameter | 1.75 in |
| Bolt Circle Dia. | 3 1/4 in |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC |
| Corrosion Resistant | No |
| Displacement (in³/rev) | 3.5 |
| Case Drain Code | 0 |
| RPM [Min] | 953 rpm |
| Shaft Type | Straight w/ Cross Hole |
| Special Features | Free Running Gerotor |
| Port Type | Manifold |
| Mounting Type Code | B |
| Seal Material | Buna-N |
| Port Code | C |
| Port Location | Side Port |
| Rotation | Standard Rotation |
| Motor Element | Gerotor |
| Inlet Pressure [Max] | 2500 psi |
| Maximum Speed @ Continuous Flow | 953 rpm @ 15 gal/min |
| Shaft Size & Type | Straight |
| Mounting Holes | 3/8-16 |
| Output Torque at Rated PSI (inch/pounds) | 802 in lb |
| Mounting Hole Size | 3/8 in |
| Series | H Series |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Mount Type | 4 Bolt |
| Pressure [Max] | 1800 psi |
| Weight | 11.5 LB |
