Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 5/16-18 UNC Manifold Port
- 3.5 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Special Features Hardware Code | AA |
| RPM [Min] | 953 rpm |
| Case Drain | None |
| Special Features | Free Running Gerotor |
| Inlet Pressure [Max] | 2500 psi |
| Mounting Hole Size | 3/8 in |
| Maximum Speed @ Continuous Flow | 953 rpm @ 15 gal/min |
| Flange Orientation | Standard |
| Case Drain Code | 0 |
| Corrosion Resistant | No |
| Flow [Max] | 15 gal/min |
| Output Shaft Code | 07 |
| Output Torque at Rated PSI (inch/pounds) | 802 in lb |
| Material | Cast Iron |
| Mount Type | 4 Bolt |
| Bolt Circle Dia. | 3 1/4 in |
| Port Location | Side Port |
| Flow Rate | 15 gal/min |
| Rotation | Standard Rotation |
| Port Code | C |
| Seal Material | Buna-N |
| RPM [Max] | 953 rpm |
| Displacement (in³/rev) | 3.5 |
| Motor Type | Spool Valve |
| Pilot Diameter | 1.75 in |
| Paint Code | A |
| Mounting Holes | 3/8-16 |
| Special Features Assembly Code | 0 |
| Mounting Type Code | B |
| Series | H Series |
| Duty | Standard-Duty |
| Shaft Size & Type | Straight |
| Shaft Type | Straight w/ Cross Hole |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Splines | 0 |
| Pressure [Max] | 1800 psi |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC |
| Motor Element | Gerotor |
| Port Type | Manifold |
| Weight | 11.5 LB |
