Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 9.7 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Pressure [Max] | 1650 psi |
| Splines | 0 |
| Port Type | SAE O-Ring |
| Shaft Size & Type | Straight |
| Material | Cast Iron |
| Bolt Circle Dia. | 3 1/4 in |
| Mounting Hole Size | 3/8 in |
| Maximum Speed @ Continuous Flow | 353 rpm @ 15 gal/min |
| Series | H Series |
| Motor Type | Spool Valve |
| Shaft Type | Straight w/ Cross Hole |
| Seal Material | Buna-N |
| Rotation | Standard Rotation |
| Special Features Assembly Code | 0 |
| Pilot Diameter | 1.75 in |
| Case Drain Code | 0 |
| Inlet Pressure [Max] | 2500 psi |
| Displacement (in³/rev) | 9.7 |
| Paint Code | A |
| Mounting Holes | 3/8-16 |
| Mounting Type Code | B |
| Port Location | Side Port |
| Motor Element | Gerotor |
| Special Features | None |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Duty | Standard-Duty |
| Case Drain | None |
| Corrosion Resistant | No |
| Flow [Max] | 15 gal/min |
| Flange Orientation | Standard |
| Port Size | SAE-10, 7/8-14 UNF |
| Special Features Hardware Code | 00 |
| RPM [Max] | 353 rpm |
| Output Shaft Code | 07 |
| RPM [Min] | 353 rpm |
| Port Size & Location | SAE-10 Side |
| Flow Rate | 15 gal/min |
| Port Code | A |
| Output Torque at Rated PSI (inch/pounds) | 2062.22 in lb |
| Mount Type | 4 Bolt |
| Weight | 12.5 LB |
