Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 9.7 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Paint/Packaging | Low Gloss Black, Individual Box |
| Seal Material | Buna-N |
| Output Torque at Rated PSI (inch/pounds) | 2062.22 in lb |
| Special Features Assembly Code | 0 |
| Inlet Pressure [Max] | 2500 psi |
| Displacement (in³/rev) | 9.7 |
| Paint Code | A |
| Pilot Diameter | 1.75 in |
| Corrosion Resistant | No |
| Port Size | SAE-10, 7/8-14 UNF |
| Output Shaft Code | 07 |
| Mounting Type Code | B |
| Mounting Holes | 3/8-16 |
| RPM [Min] | 353 rpm |
| Series | H Series |
| Motor Element | Gerotor |
| Shaft Type | Straight w/ Cross Hole |
| Flow [Max] | 15 gal/min |
| Material | Cast Iron |
| Rotation | Standard Rotation |
| Port Type | SAE O-Ring |
| Flow Rate | 15 gal/min |
| Duty | Standard-Duty |
| Port Size & Location | SAE-10 Side |
| Port Code | A |
| Maximum Speed @ Continuous Flow | 353 rpm @ 15 gal/min |
| Special Features Hardware Code | 00 |
| Mount Type | 4 Bolt |
| RPM [Max] | 353 rpm |
| Splines | 0 |
| Pressure [Max] | 1650 psi |
| Shaft Size & Type | Straight |
| Port Location | Side Port |
| Case Drain Code | 0 |
| Motor Type | Spool Valve |
| Flange Orientation | Standard |
| Special Features | None |
| Mounting Hole Size | 3/8 in |
| Case Drain | None |
| Bolt Circle Dia. | 3 1/4 in |
| Weight | 12.5 LB |
