Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 9.7 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Port Type | NPTF |
| Flow Rate | 14 gal/min |
| Splines | 0 |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Output Torque at Rated PSI (inch/pounds) | 2062 in lb |
| Shaft Size & Type | Straight |
| Port Location | Side Port |
| Port Code | B |
| Corrosion Resistant | No |
| Duty | Standard-Duty |
| Pressure [Max] | 1650 psi |
| Special Features Assembly Code | 0 |
| RPM [Min] | 353 rpm |
| Motor Element | Gerotor |
| Output Shaft Code | 08 |
| Special Features | None |
| Bolt Circle Dia. | 4.187 in |
| Mounting Holes | 0.535 in |
| Material | Cast Iron |
| Inlet Pressure [Max] | 2500 psi |
| Mounting Type Code | A |
| Flange Orientation | Standard |
| Maximum Speed @ Continuous Flow | 353 rpm @ 15 gal/min |
| RPM [Max] | 353 rpm |
| Port Size & Location | 1/2 in NPTF Side |
| Port Size | 1/2, 1/2-14 |
| Paint Code | A |
| Case Drain Code | 0 |
| Shaft Type | Straight w/ Cross Hole |
| Case Drain | None |
| Flow [Max] | 15 gal/min |
| Mounting Hole Size | 0.565 in |
| Series | H Series |
| Pilot Diameter | 3.25 in |
| Displacement (in³/rev) | 9.7 |
| Special Features Hardware Code | 00 |
| Rotation | Standard Rotation |
| Seal Material | Buna-N |
| Motor Type | Spool Valve |
| Mount Type | 2 Bolt |
| Weight | 12.5 LB |
