Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 5.9 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
| Material | Cast Iron |
| RPM [Min] | 585 rpm |
| Flow [Max] | 15 gal/min |
| Rotation | Standard Rotation |
| Duty | Standard-Duty |
| Port Type | NPTF |
| Splines | 0 |
| Flow Rate | 15 gal/min |
| Paint/Packaging | Low Gloss Black, Individual Box |
| RPM [Max] | 585 rpm |
| Seal Material | Buna-N |
| Case Drain Code | 0 |
| Pilot Diameter | 3.25 in |
| Mounting Hole Size | 0.535 in |
| Shaft Type | Straight w/ Cross Hole |
| Shaft Size & Type | Straight |
| Motor Type | Spool Valve |
| Mounting Holes | 0.535 in |
| Pressure [Max] | 1800 psi |
| Output Torque at Rated PSI (inch/pounds) | 1368 in lb |
| Motor Element | Gerotor |
| Special Features Assembly Code | 0 |
| Special Features | None |
| Bolt Circle Dia. | 4.19 in |
| Port Code | B |
| Mount Type | 2 Bolt |
| Mounting Type Code | A |
| Port Location | Side Port |
| Flange Orientation | Standard |
| Port Size | 1/2, 1/2-14 |
| Special Features Hardware Code | 00 |
| Inlet Pressure [Max] | 2500 psi |
| Output Shaft Code | 08 |
| Corrosion Resistant | No |
| Case Drain | None |
| Displacement (in³/rev) | 5.9 |
| Series | H Series |
| Paint Code | A |
| Port Size & Location | 1/2 in NPTF Side |
| Weight | 11.8 LB |
