Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 5.9 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Output Shaft Code | 08 |
| Shaft Type | Straight w/ Cross Hole |
| RPM [Min] | 585 rpm |
| RPM [Max] | 585 rpm |
| Output Torque at Rated PSI (inch/pounds) | 1368 in lb |
| Duty | Standard-Duty |
| Flow Rate | 15 gal/min |
| Port Code | B |
| Mounting Hole Size | 0.535 in |
| Bolt Circle Dia. | 4.19 in |
| Corrosion Resistant | No |
| Motor Element | Gerotor |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Port Size | 1/2, 1/2-14 |
| Case Drain Code | 0 |
| Port Size & Location | 1/2 in NPTF Side |
| Port Type | NPTF |
| Special Features Assembly Code | 0 |
| Flow [Max] | 15 gal/min |
| Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
| Rotation | Standard Rotation |
| Special Features | None |
| Motor Type | Spool Valve |
| Port Location | Side Port |
| Pressure [Max] | 1800 psi |
| Series | H Series |
| Displacement (in³/rev) | 5.9 |
| Shaft Size & Type | Straight |
| Special Features Hardware Code | 00 |
| Seal Material | Buna-N |
| Mounting Holes | 0.535 in |
| Splines | 0 |
| Material | Cast Iron |
| Case Drain | None |
| Pilot Diameter | 3.25 in |
| Mounting Type Code | A |
| Mount Type | 2 Bolt |
| Paint Code | A |
| Inlet Pressure [Max] | 2500 psi |
| Flange Orientation | Standard |
| Weight | 11.8 LB |
